Kohler Rite-Temp K-304-K Pressure Balancing Valve Body

Kohler Rite-Temp K-304-K Pressure Balancing Valve Body

Rite-Temp© pressure-balancing valve

This Rite-Temp pressure-balancing valve works behind the scenes to prevent scalding and freezing for a safe, comfortable water supply. The valve features a high-temperature limit stop and an optimal comfort zone, so you can set a maximum high and then find and maintain your desired water temperature. Additionally, the unit has a diaphragm design that virtually eliminates freeze-ups from contamination and water debris. Universal NPT and direct sweat connections need no additional parts for installation.

Back-to-back installation is ideal for unique or high-volume jobs
Large internal ports allow quick bath filling
Provides anti-scald protection and temperature regulation at flow rates as low as 1.75 gpm; far below federally mandated standards of 2.5 gpm

Features of the Kohler Rite-Temp K-304-K Pressure Balancing Valve Body:

Brass valve body
High-temperature limit stop for added safety
Mixing valve cycles from "cold" to "hot"
Rite-Temp pressure-balancing diaphragm design valve
One-piece diaphragm cartridge design for ease of maintenance
Without screwdriver stops

Also Known As:
K.304.K
K 304 K
K_304_K
K304K

Rite-Temp pressure-balancing valve shall have a brass valve body. Product shall include a Rite-Temp pressure-balancing diaphragm design valve with a one-piece diaphragm cartridge design for ease of maintenance. Product shall have mixing valve cycles from "cold" to "hot" and a high-temperature limit stop for added safety. Product shall be available without (-K). Valve shall be Kohler Model K-304-K-NA, K304-K-NA, K-304-K.

Installation Notes

Install this product according to the installation guide.

Avoid cross-flow conditions. Do not install a shut-off device on either valve outlet.

Cap shower outlet if deck-mount spout, diverter, or handshower is connected to spout outlet.

Install straight pipe or tube drop of 7" to 18" with single elbow between valve and wall-mount spout.

Codes/Standards Applicable
Specified model meets or exceeds the following:

ASME A112.18.1

ASSE 1016

CSA International

IAPMO/UPC

Files for the Kohler Rite-Temp K-304-K Pressure Balancing Valve Body

040688638935 UPC/EAN:

Note: Specifications and pricing of the Kohler Rite-Temp K-304-K Pressure Balancing Valve Body subject to change without notice. Illustrations and descriptions of the Kohler K-304-K do not claim to be complete or exhaustive.